Safety starts with
precise negative-pressure monitoring.
The aircontrol is the IoT-connected negative-pressure measuring system for safety-critical containment areas: four measurement channels, triple-redundant data storage and full online configuration. PDF reports simplify documentation and provide evidence for authorities, audits and internal quality processes.
Never miss a fault
If negative pressure leaves the safe range, the aircontrol alerts your team instantly by email, SMS and voice call.
Triple data security
A thermal printer, SD card and the decoNXT cloud store every reading in parallel. In the cloud they stay available for up to 10 years.
PDF reports
Professional reports for your records, audits or authorities — with measurements, events and device settings.
Everything included
SIM card, data transfer, cloud storage and PDF reports are already included — with no ongoing extra fees.
Four pressure points, one device
Measure negative pressure at four points at once with a single device. Monitors negative pressure in containment areas reliably, around the clock.
- Four independent channels for four simultaneous measurements
- Individual minimum and maximum thresholds per channel
- Monitor several containment zones with a single unit
- Fewer devices required on site
- Synchronized readings across all channels
Live overview of your entire fleet
Keep track of status, pressure readings, and active channels for all devices in one central overview.
All device data in one view.
Status, live measurements, location, and control functions for every aircontrol unit, clearly combined in the dashboard.
Every value, recorded three ways
A thermal printer, SD card and the decoNXT cloud store every reading in parallel. In the cloud they stay available for up to 10 years.
- Built-in thermal printer for on-site paper records
- Integrated SD card for local data storage
- Continuous synchronization to the decoNXT cloud
- Pressure values, faults, and configuration changes are all logged
- Complete documentation and traceability — even offline
Reliable alerts when it matters.
Each device can trigger alerts individually by SMS, email, or voice call – separately or in combination.
Pressure too low
Alerts when negative pressure drops below the set minimum.
Pressure too high
Alerts when negative pressure exceeds the set maximum.
Power failure
Warns immediately if the power supply is interrupted.
One socket, many safeguards.
Each device features a freely configurable switching socket that responds automatically to your pressure thresholds.
- Connect an alarm light that activates on a fault
- Or connect a backup negative-pressure unit
- The backup unit switches on automatically when pressure drops below the minimum
- Socket behaviour configurable per channel
Make your negative-pressure monitoring audit-proof.
Download user manualConfigure every device from anywhere.
The aircontrol is completely configurable online. Set pressure limits and socket behaviour per channel from the web platform or mobile app — individually or across the entire fleet.
- Set minimum and maximum negative pressure thresholds
- Configure the switching socket individually per channel
- Adjust every device parameter remotely, without site access
- Roll out configuration changes to entire device fleets
- Redundant local control directly on the device
Built for field use – independent of location.
LTE-M, 2G, and Wi-Fi provide connectivity. Measurement data is stored locally and additionally synchronized to the cloud.
Complete PDF reports in just a few clicks.
Every measurement campaign is summarized in a standardized PDF report – including measurement data, device messages, configurations, and metadata.
- Configurable PDF reports
- Freely definable details such as title, location, and sample description
- Measurement data, device messages, and configuration history in one report
- Standardized report structure for every measurement campaign
Report overview
Measurement information, configuration, and campaign details.
Meets the typical requirements for negative-pressure monitors.
The aircontrol is built around the criteria that tenders and authorities commonly request for hazardous-material remediation sites.
- 0–100 Pa measuring range
- Alerting on pressure loss
- Remote alerts by SMS, email & voice call
- Built-in data logger (SD card & cloud)
- Gap-free long-term recording (up to 10 years)
- Automatic site documentation as PDF
- CE-compliant
- Annual calibration available in-house
Note: there is no single harmonized EU standard for negative-pressure monitors on hazardous-material sites. The aircontrol supports documentation in line with national hazardous-substance rules (e.g. TRGS 519 in Germany). An annual calibration is recommended and can optionally be carried out in-house at deconta.
aircontrol at a glance
- Measuring range
- 0–100 Pa
- Measurement channels
- 4
- Display
- 7″ Touch
- Connectivity
- NB-IoT · LTE-M · WLAN
- Power supply
- 230 V
- Dimensions (W×D×H)
- 515 × 210 × 340 mm
- Weight
- 7.8 kg
- Data storage
- Printer · SD · Cloud
Frequently asked questions
Does the aircontrol meet the requirements for hazardous-material sites (e.g. TRGS 519)?
The aircontrol supports complete documentation in line with national hazardous-substance regulations such as Germany's TRGS 519. There is no single harmonised EU standard for negative-pressure measuring devices. Continuous logging, remote alarms and automatic PDF reports provide audit-proof evidence for authorities and audits.
How does the aircontrol alert me when pressure drops?
If the negative pressure leaves the configured range, the aircontrol alerts your team immediately by SMS, email and voice call – individually or combined, configurable per device.
How long and where is the measurement data stored?
Every reading is backed up three times: via the built-in thermal printer, an SD card and the decoNXT cloud. In the cloud the data stays available for up to 10 years.
Can the device be configured remotely?
Yes. Pressure limits, socket behaviour and all device parameters can be set fully online through the decoNXT web platform or app – individually or across your entire fleet, with no on-site access required.
What measuring range and how many channels does the aircontrol have?
The aircontrol measures 0–100 Pa across four independent channels simultaneously, monitoring several containment areas with a single device.
Who manufactures the aircontrol?
The aircontrol is built by deconta GmbH in Germany (Made in Germany). decoNXT is deconta GmbH's IoT platform, used to connect, monitor and configure the device.
Interested in aircontrol?
We would be happy to introduce the aircontrol to you personally or send you a data sheet.